Purchase and install a fake wooden venetian blinds on line is easy that the hardest part will be the color. After that part of the process is complete and the blinds You have arrived at your house, then fun really begins and it is time to change the room in just a few minutes. In fact you only need a few basic items to get started. You need an electric hand drill or without wires with the “nut driver or screwdriver bit is placed as a 3 / 32″ 1 / 4 drill bits, pencils and stairs. How easy is it? Let’s start and do a pro in no time.

The first step is to check to see if your curtains are installed inside or outside mounted. If you are unsure, here is the difference. Inside mount blinds are the hooks in the open window, and curtains in the opening, too. Outside mount blinds have a bracket outside the open window in the wall around it. The following guidelines are to simply mount the curtain.

Now you’re ready for the fun part. Take the curtains sent in and find all parts needed to install them. You must have two brackets (labeled left and right) for each, screw clips blind and mosquito net. If your blinds are 72 “inches or larger, you will find in brackets the center support, too.

With all the equipment you open and ready, place the mounting brackets on each side of the open window. This saves your precious time and avoid the mistake of installing the brackets on the wrong side. To install the curtain against the wall brackets you want a trench about ½ “from the front edge of one window Line link in the window where you want to hang .. You two diagonal holes with a pencil, remove the bracket. And drill a hole an inch deep to screw up. Now that you have a hole, you can use the bracket back into place and secure it with screws. Now repeat the process on the other side of the window.

If your blinds is 72 “or larger variations, you will have an extra step that you must now install the center bracket for your support .. This step is very important and should not be beaten. Bracket center remains a bigger curtain support subsidence. This is the easiest and fastest way to get support center have been installed. You need the rail brackets are installed lean left and right. Then you will be the center bracket slides on the rail head and center in the middle of the window. Mark the locations with a pencil You Now remove the rail head and the heart .. mount bracket with screws that match your pencil marks. You can now replace the head of the third rail hooks and connect the two outside brackets.

You’re almost done. The final step is to install their networks. Wrap the cord of the blind head rail ensure it will not entangle them. Position clips off the head of the track about 18 “apart, stay clear of blind and cable channels. Now, the blind headrail into the brackets and snap the hinge shut. Slotte, insert the clip into the mosquito net mosquito net.

Your blinds are now installed and ready to enjoy.

Here is the video to buy blinds on line:

Related posts:

1. Choose the Kinds of Blinds for sliding glass doors
2. The Two Main Choices of Window Accessories
3. Window Coverings to Complete your Room Decor